TDI Lasers

TJ General Store

[ Home ] [ Advanced Technology ] [ Aimtech Mounts ] [ AK-47 Drum Mag ] [ AmegaRanges ] [ Barrel De-Resonator ] [ B-Square ] [ Beamshot Lasers ] [ Beretta ] [ Bianchi Holsters ] [ Big Sky Carvers ] [ Blackpowder Rifles ] [ Books ] [ Bullet Hole Decals ] [ Bushnell Optics ] [ Burris Optics ] [ Cabin Critters ] [ Choate Gunstocks ] [ Choke Tubes ] [ Canine Trauma Kits ] [ Crimson Trace Lasers ] [ CVA Optima Elite Barrels ] [ CZ Accessories ] [ Dog Training Collars ] [ Elzetta Mounts ] [ Fobus Holsters ] [ Gift Certificate ] [ Glock Accessories ] [ Gun Stocks ] [ Harris Bipods ] [ High Capacity Mags ] [ IdentiFlyer ] [ Ironsighter Mounts ] [ Laserlyte ] [ LaserMax ] [ Leupold Optics ] [ Lynx Mounts ] [ Magazines ] [ Magazine Loaders ] [ Magnum Research ] [ Mako Tactical Equipment ] [ Maxima Scope Mounts ] [ Millett Scope Mounts ] [ Misc. ] [ NCStar ] [ Nikon Optics ] [ Pet Toys ] [ Ramline Stocks and Accessories ] [ S&W Frames ] [ Sako/Tikka Mounts ] [ Shooters Ridge ] [ Shooting Accessories ] [ Shotgun Barrels ] [ Sightron Scopes ] [ Speedfeed Stocks ] [ TacStar Shotgun Accessories ] [ Tactical Lighting ] [ Talley Mounts ] [ Tasco Optics ] [ T/C Barrels ] [ TDI Lasers ] [ UltiMAK Mounts ] [ Uncle Mike's ] [ Versa-Pod ] [ Videos ] [ Warne Maxima Mounts ] [ Weaver Optics ] [ Winchester Optics ] [ Ballistic Charts ] [ Camping Gear ] [ Trap and Skeet ] [ Fishing and Watersports ] [ Specials ] [ The Mountain Shirts ]

TDI and Command Arms Tactical Equipment

TJ General Store offers a complete line of tactical mounts and accessories from TDI Arms.

www.tdi-arms.com

Contact the manufacturer above for technical help, please use the BUY buttons on the web page to order the products you want from TJ General Store.

This page will take about a minute to complete load due to all the great graphics to help you better understand exactly what you are purchasing. Please be patient.

Using TDI Adaptors and Mounts, you can put a Picatinny/Weaver rail on most guns, and mount lasers, sights, bipods, and lights. Some adapters and forends will hold up to three to four accessories.

TDI-Arms Technology is a world leader in the development and manufacture of Superior Advanced Arms Accessories.

Working with special units throughout the world, TDI is continually developing tactical accessories to add to the catalogue of products, which include advanced Light and Laser devices, Bi-Pods, Hand Grips, Picatinny Rails and Adaptors. TDI mounts carry a lifetime warranty

AK-47 Lower Forearm Tri-Rail System With this replacement forearm, you can attach a laser, flashlight, grip, bipod, or anything that will attach to a picatinny rail!!!

TDI-LHV-47B shown on gun with bipod, laser, flashlight, and grip.

TDI-LHV-47B shown on gun with bipod, laser, flashlight, and grip.	TDI-LHV-47B shown on gun with bipod, laser, flashlight, and grip.

TDI-LHV-47B Side View on gun	TDI-LHV-47B Bottom View on gun

TDI-LHV-47DT Side View	TDI-LHV-47DT Bottom View

TDI-LHV-47ODG Side View	TDI-LHV-47ODG Bottom View

TDI-LHV-47B shown on gun with bipod, laser, flashlight, and grip.	TDI-LHV-47B shown on gun with bipod, laser, and flashlight.
	AK-47/MAC 90 Lower Forearm Rail Mounting System w/ OFEK-1 and Flashlight shown to the left. Now you can mount all the good stuff on your AK.
Provides three Picatinny/Weaver mounting rails for sighting and lighting equipment. Shown with OFEC-1 and light (not included). No gunsmithing required. Simply remove the original lower forearm and replace with the AK rail mount. Provides and extremely secure mounting platform for lasers and tactical lighting equipment. One full length rail on bottom with one short rail on each side. Can also mount bipods and lower combat grips simultaneously on the bottom rail. Both sold below. You can mount anything on the rails that will fit a Picatinny or Weaver rail. Cleaning rod can still be inserted as in the original lower forearm. Available in black, OD Green, and Desert Tan. Fits stamped and milled receivers, AK-47/MAC90 pre-ban and post-ban configurations, no bayonet lug required. Fits folding stock rifles also. Make your AK complete by ordering the matching AK Upper Handguard below.

Order Number	Description	Price
TDI-LHV-47B	TDI AK Lower Forearm Tri-Rail System, black	$44.00
TDI-LHV-47ODG	TDI AK Lower Forearm Tri- Rail System, OD Green	$44.00
TDI-LHV-47DT	TDI AK Lower Forearm Tri- Rail System, Desert Tan	$44.00

AK-47 Upper Handguard Rail System

LHV47TB and LHV-47B Shown Above on AK-47

AK upper handguard rail mount (shown in light brown). A perfect match to the AK lower forearm above.

Upper Handguard Shown

Order Number	Description	Price
TDI-LHV47T-BLK	TDI AK-47 Upper Handguard Rail Mount, black	$44.00
TDI-LHV47T-OD	TDI AK-47 Upper Handguard Rail Mount, OD Green	$44.00
TDI-LHV47T-Tan	TDI AK-47 Upper Handguard Rail Mount, Desert Tan	$44.00

Beretta Pistol Accessories

Beretta Pistol accessories for model F92 including pistol picatinny rail adaptors to mount flashlights and lasers.

Command Arms Beretta F92 Pistol Picatinny Rail Adaptor Fits the Beretta F92. Add an accessory rail to your Beretta pistol. Maximize pistol versatility for the fitting of light, laser and optical equipment, bipods and any Picatinny rail mounted device Secure fit for accuracy and stability Lightweight Milled by CNC and constructed of anodized aviation aluminum Easy to fit Secured by Allen bolts No gunsmithing or any modification to the Fire arm is required
Item Number	Price
BERA1	$57.00

6-Rail System for Short M16/AR15/M4 Compliant with MIL-STD 1913, this exceptional design allows you to fit numerous mission-specific accessories such as forearm grip, bipod, flashlight and others, on any of the 6 Picatinny/Weaver Rails Specifically designed and manufactured to give a 100% secure fit that does not restrict barrel movement Constructed of billet aviation grade aluminum using CNC machinery A 7th adjustable rail may be added (Sold separately) Easy to fit. No Gunsmithing required Accompanied by Long & Short heat-resistant rail covers *Lifetime Warranty

X6 Shown Above On Rifle	X6 Shown Above

3 Colors Available Black, Desert Tan, and OD Green	X6 Shown Above On Rifle with grip and scope (not included)

Item Number	Description	Price
TDI-X6B	TDI 6-Rail System for Short M16/AR15/M4 Black	$290.00
TDI-X6DT	TDI 6-Rail System for Short M16/AR15/M4 Desert Tan	$290.00
TDI-X6ODG	TDI 6-Rail System for Short M16/AR15/M4 OD Green	$290.00

TDI 7-Rail System for Short M16/AR15/M4 Compliant with MIL-STD 1913, this exceptional design allows you to fit numerous mission-specific accessories such as forearm grip, bipod, flashlight and others, on any of the 7 Picatinny/Weaver Rails Specifically designed and manufactured to give a 100% secure fit that does not restrict barrel movement 7th Rail located above the barrel is adjustable in height to ensure maximum accuracy while using a laser sight Constructed of billet aviation grade aluminum using CNC machinery Easy to fit. No Gunsmithing required Accompanied by Long & Short heat-resistant rail covers *Lifetime Warranty

TDI-X6X Shown above on gun with scope and grip		TDI-X6X Shown above on gun with scope, light, and grip
Item Number	Price
TDI-X6X	$310.00

TDI 6-Rail System for Long M16/AR15/M4 Compliant with MIL-STD 1913, this exceptional design allows you to fit numerous mission-specific accessories such as forearm grip, bipod, flashlight and others, on any of the 6 Picatinny/Weaver Rails Specifically designed and manufactured to give a 100% secure fit that does not restrict barrel movement Constructed of billet aviation grade aluminum using CNC machinery A 7th adjustable rail may be added (Sold Separately) Easy to fit. No Gunsmithing required Accompanied by Long & Short heat-resistant rail covers *Lifetime Warranty

TDI-X6L Shown on Gun	TDI-X6L Shown on Gun With Rail Covers Attached

TDI-X6L Shown on Gun With Accessories (not included)	TDI-X6L Shown on Gun With Accessories (not included)

Item Number	Description	Price
TDI-X6L	TDI 6-Rail System for Long M16/AR15/M4 (Rail System Only)	$370.00

TDI 7-Rail System for Long M16/AR15 Compliant with MIL-STD 1913, this exceptional design allows you to fit numerous mission-specific accessories such as forearm grip, bipod, flashlight and others, on any of the 7 Picatinny/Weaver Rails Specifically designed and manufactured to give a 100% secure fit that does not restrict barrel movement 7th Rail located above the barrel is adjustable in height to ensure maximum accuracy while using a laser sight Constructed of billet aviation grade aluminum using CNC machinery Easy to fit. No Gunsmithing required Accompanied by Long & Short heat-resistant rail covers *Lifetime Warranty

TDI-X6LX Shown On Gun		TDI-X6LX Shown On Gun with Accessories (not included)
Item Number	Price
TDI-X6LX	$385.00

TDI M16MC M16/AR15 or Ruger Mini 14 Mag Coupler Expands ammunition capacity and saves reload time by joining two magazines for the M16/AR15 or the Ruger Mini 14. Coupler will not scratch of deform mags. lightweight and fiberglass, reinforced with a lifetime warranty. Battle tested and now being used by front line forces in several theatres of operation.
Item Number	Price
M16MC	$13.00

Ergonomic Grip With Battery Compartment Grip fits and picatinny rails Holds and stores either 2 AA batteries or 3 Lithium batteries Pressure switch housing to securely and conveniently hold a pressure switch for your laser of flashlight

Item Number	Description	Price
RB-FGRP168B	Ergonomic Grip With Battery Compartment Black	$27.00
RB-FGRP168DT	Ergonomic Grip With Battery Compartment Desert Tan	$27.00
RB-FGRP168ODG	Ergonomic Grip With Battery Compartment OD Green	$27.00

TDI 5-Rail System for AK47/AK74 Compliant with MIL-STD 1913, this exceptional design allows you to fit numerous mission specific accessories including heavy night-vision devices on any of the 5 Picatinny/Weaver Rails attached to it Expect to find an extremely rigid platform, which is compatible with most AK types available in the market 3-Part modular system, constructed of billet aviation grade aluminum using CNC machinery Lifetime Warranty

TDI-AK47X Shown Above		TDI-AK47X Shown Above On Gun

TDI-AK47X Shown Above On Gun With Accessories (not included)		TDI-AK47X Shown Above On Gun With Accessories (not included)
Item Number	Price
TDI-AK47X	$395.00		OUT

Command Arms AK-47 Tactical Pistol Grip

*This new tactical pistol grip is sure to increase the performance of your rifle or carbine
*Made from reinforced polymer composite, it incorporates finger swelts and a backstrap that is designed with surfacing to enhance your grip and minimize the chance of slippage should the grip become wet
*No storage compartment on bottom
*Light-weight
*Grip Length: 4.25 inches/10.5cm
*No gunsmithing required
*Available in 3 colors Black, Desert Tan, and OD Green
*Lifetime Warranty

AG47B Shown Above

AG47B Shown Above on Gun

AG47T Shown Above

AG47ODG Shown Above

Item Number	Description	Price
CA-AG47B	CA AK-47 Tactical Pistol Grip Black	$29.00
CA-AG47T	CA AK-47 Tactical Pistol Grip Desert Tan	$29.00
CA-AG47ODG	CA AK-47 Tactical Pistol Grip OD Green	$29.00

First Samco Tactical Pistol Grip for AR15/M16/M4

This new tactical pistol grip is sure to increase the performance of your rifle or carbine

Made from reinforced polymer composite, it incorporates finger swelts and a backstrap that is designed with surfacing to enhance your grip and minimize the chance of slippage should the grip become wet

Storage compartment on bottom

Light-weight

Grip Length: 4.25 inches/10.5cm

No gunsmithing required

Lifetime Warranty

G27B	First Samco Tactical Pistol Grip for AR15/M16/M4 Black	$28.00
G27T	First Samco Tactical Pistol Grip for AR15/M16/M4 Tan	$28.00
G27ODG	First Samco Tactical Pistol Grip for AR15/M16/M4 OD Green	$28.00

TDI Glass Breaker - The quickest & safest way to break windows. - Great use for Law Enforcement and Paramedic Personal. - Strong spring action. - Lock-on lever. - Can be mounted on Pistol or Picatinny rail devices. - Lower Picatinny for additional accessories mounting on.
		TDI-WB-2 Shown Above

TDI-WB-2 Shown Above On Handgun		TDI-WB-2 Shown Above On Handgun
Item Number	Price
TDI-WB-2	$175.00

TDI AK47 Mag Coupler Joins two magazines for the AK-47 rifle, providing greater ammunition availability Comes with two couplers
Item Number	Price
AK47MC	$12.00

Tactical Butt Stock with battery storage and Magazine housing rail to fit AR/M16/M4 (includes tube,spring and buffer)

Storage space for CR123 batteries (4).
(Access from left or right hand side as required).
Ergonomic rubber shock absorber.
Side mounted Picatinny rail enables device
mounting on the stock right or left and side as required.
Spare magazine housing (purchased separately) can be mounted on the Picatinny rail mount on the side of the stock as required (optional).
Quick release sling adaptors, for both right and left handed shooter, located both at the front and rear of the stock.
Suitable for AR15/M16/M4 or equivalent buffer tube guns.
LIFETIME WARRANTY.

Available in Black, Tan, and OD Green

Item Number	Description	Price
CBST-B	TDI Tactical Butt Stock with battery storage and Magazine housing rail to fit AR/M16/M4 (with tube) Black	$89.00
CBST-T	TDI Tactical Butt Stock with battery storage and Magazine housing rail to fit AR/M16/M4 (with tube) Tan	$89.00
CBST-ODG	TDI Tactical Butt Stock with battery storage and Magazine housing rail to fit AR/M16/M4 (with tube) OD Green	$89.00

Tactical Butt Stock with battery storage and Magazine housing rail to fit AR/M16/M4 (stock only,no tube, no spring, no buffer)

Item Number	Description	Price
CBS-B	TDI Tactical Butt Stock with battery storage and Magazine housing rail to fit AR/M16/M4 (no tube) Black	$53.00
CBS-T	TDI Tactical Butt Stock with battery storage and Magazine housing rail to fit AR/M16/M4 (no tube) Tan	$53.00
CBS-ODG	TDI Tactical Butt Stock with battery storage and Magazine housing rail to fit AR/M16/M4 (no tube) OD Green	$53.00

TDI Saddle-Ergonomic Cheek Rest for M16/AR15/M4 Butt Stock Saddle-Ergonomic cheek rest with two storage compartments for M16/AR15/M4 Butt Stock. Features: • Greatly increases the cheek support whilst shooting. • Significantly improves the cheek and head stability whilst aiming and shooting - eliminates the typical head movement and fatigue associated with ‘sighting in’ targets for extended periods. • Faster target acquisition and stay on target. • Store up to Six CR123 batteries. • Store cleaning materials and other small gun parts. • Waterproofed. • Lightweight. • Suitable for butt stocks manufactured by Colt, Bushmaster, CAA, Tapco, Rockriver Arms, Armalite, Colt Canada and many more. • Lifetime warranty. Batteries Not Included

SST1 shown on stock		SST1Black

SST1BLACK Showing Battery Compartments		SST1BLACK Showing Battery Compartments
Item Number	Description	Price
SST1BLACK	TDI Saddle-Ergonomic Cheek Rest for M16/AR15/M4 Butt Stock Black	$20.00
SST1TAN	TDI Saddle-Ergonomic Cheek Rest for M16/AR15/M4 Butt Stock Tan	$20.00
SST1ODG	TDI Saddle-Ergonomic Cheek Rest for M16/AR15/M4 Butt Stock OD Green	$20.00

TDI M16/AR15 4 Rail Handguard Set - Carbine/M4 Handguard Set (Carbine) M4 4-sided Picatinny rail system for mounting accessories such as lasers, flashlights, bipods, and grips Thermal rubber covers and heat shields included No tools of fittings required
Carbine TDI-M44-s and Full Length TDI-M44L Shown Above
Item Number	Price
TDI-M44-S	$128.00

TDI M16/AR15 4 Rail Handguard Set - Full Size Rifle Handguard Set (Rifle) 4-sided Picatinny rail system for mounting accessories such as lasers, flashlights, bipods, and grips Rifle Length Thermal rubber covers and heat shields included No tools of fittings required
		Carbine TDI-M44-s and Full Length TDI-M44L Shown Above
Item Number	Price
TDI-M44-L	$128.00

TDI M16/AR15 Carbine/M4 Forearm Handguard with 2 Picatinny Rails The M33 is built to fit the M16/AR15 carbine. The handguard provides 2 mounting rails, complete with thermal rubber rail covers and heat shields. No tools or gunsmithing required for installation.

Item Number	Price
TDI-M33	$84.00

Holds any one inch diameter light or laser.

Will open to 1.08" (27.5mm) to accommodate Streamlight Stinger Flashlight

Pictures of OFEK1 shown below on gun attached to a Picatinny rail with flashlight.

Item Number	Description	Price
TDI-OFEK1B	TDI Arms OFEK1 Under Forearm Flashlight Adaptor Grip For Picatinny Rail, Black, Flashlight not included	$34.00
TDI-OFEK1OD	TDI Arms OFEK1 Under Forearm Flashlight Adaptor Grip For Picatinny Rail, OD Green, Flashlight not included	$34.00
TDI-OFEK1TAN	TDI Arms OFEK1 Under Forearm Flashlight Adaptor Grip For Picatinny Rail, Desert Tan, Flashlight not included	$34.00

TDI Arms Picatinny Rails
	Long and short rails shown above for thick and thin grips.

Picatinny Rail shown above mounted on handguard

Attach accessories such as OFEC1 and flashlight	Rail mounts to handguard through holes

Item Number	Description	Price
TDI-PR-A	TDI Arms Picatinny Rail For M16/AR-15 Std Grip, fits handguards with vent holes that are approximately 3/4 inch center to center, rail is 5-5/8" long	$16.00
TDI-PR-B	TDI Arms Picatinny Rail For M16/AR-15 Thick Grip, fits handguards with vent holes that are approximately 3/4 inch center to center, rail is 5-5/8" long	$16.00
TDI-SR-A	TDI Arms Short Picatinny Rail For M16/AR-15 Thick Grip, fits handguards with vent holes that are approximately 3/4 inch center to center, rail is 1-1/2" long	$10.00
TDI-SR-B	TDI Arms Short Picatinny Rail For M16/AR-15 Standard Grip, fits handguards with vent holes that are approximately 3/4 inch center to center, rail is 1-1/2" long	$10.00

TDI Arms Rail Mount For UZI Bayonet Lug


Mounts shown above on gun with flashlight accessories. Lights and lasers sold separately.

Item Number	Description	Price
TDI-TUZ-A1	TDI Arms Bayonet Lug Picatinny Rail Mount for Uzi Sub Machine Gun	$42.00
TDI-TMUZ-A1	TDI Arms Bayonet Lug Picatinny Rail Mount for Uzi Pistol	$42.00

TDI Arms Bayonet Lug Picatinny Rail Mount

TM16FA shown on gun	TM16FA shown on gun with Streamlight Flashlight

TM116FA shown on gun with bipod

Item Number	Description	Price
TM16FA1	TDI Arms Bayonet Lug Picatinny Rail Mount fits M16/AR15 with military style front sights. Mount only, lasers, lights and bipods sold separately.	$55.00



TDI-VGS Pictured Using Picatinny Rail on AR-15	TDI-AVG Pictured Using Picatinny Rail on AR-15	TDI-VGS Pictured Using Picatinny Rail	TDI-AVG Pictured Using Picatinny Rail

Item Number	Description	Price
TDI-VGS-B	TDI Arms Front Arm Short Vertical Grip, Black	$29.00
TDI-VGS-OD	TDI Arms Front Arm Short Vertical Grip, OD Green	$29.00
TDI-VGS-T	TDI Arms Front Arm Short Vertical Grip, Desert Tan	$29.00
TDI-AVG-B	TDI Arms Front Arm Ergonomic Vertical Grip, Black	$33.00
TDI-AVG-OD	TDI Arms Front Arm Ergonomic Vertical Grip, OD Green	$33.00
TDI-AVG-T	TDI Arms Front Arm Ergonomic Vertical Grip, Desert Tan	$33.00

Note: VGS grip will fit on bottom rail of AK Tri-Rail with bipod. Folding Tactical Grip and AVG will not fit with bipod, they are too long for both the grip and the Bipod (BPO) to fit on the same rail.

TDI Folding Tactical Grip Vertical & Horizontal tactical grip, designed to the minute ergonomic details to enable the shooter to transform horizontal grip to vertical grip in a second. Features: • Transforms a horizontal grip to a vertical grip for different shooting applications. • Natural "fighting stance" hold on your rifle. • Designed to mount on Picatinny or Weaver rail. • Easy to fit and secure. • Secured locking implement. • Reinforced plastic composite. • Super light weight. • No gunsmithing is required. • Lifetime warranty from TDI.

TDI-FFG2B Shown folded (Horizontal)		TDI-FFG2B Shown open (Vertical)

TDI-FFG2B Shown on TDI-X6		TDI-FFG2B Shown on TDI-X6

TDI-FFG2B shown on TDI-LHV-47B

Order Number	Description	Price
TDI-FFG2B	TDI Folding Tactical Grip, Black	$46.00
TDI-FFG2-OD	TDI Folding Tactical Grip, OD Green	$46.00
TDI-FFG2-T	TDI Folding Tactical Grip, Desert Tan	$46.00

Item Number		Price
TDI-FFG-4B	TDI Tactical 4-Way Folding Grip	$48.00

INTEGRATED RAIL SYSTEM - X5 FOR MP5

Introducing X5 – the world’s first 5 rail system, specifically designed and manufactured to give a 100% secure fit that does not restrict barrel movement. The X5 provides a five rail system, compliant with MIL-STD 1913. (Picatinny rail) The X5 has been designed to fulfill the increasing demand for weapon mounted optical and laser devices. Our products are of superb quality and with a secure, non-movable rail system. The X5 is the Ultimate Arms Accessory, ensuring maximum accuracy and stability during the toughest workout of your weapon. Features: * Solid & non-movable once fitted. * 5 Rail feature – to MIL-STD 1913 . * Matching height range to M16 flat top upper receiver rail. * Twin rails attaching to front sight. * 5 Bolt Secure system. * No Gunsmithing required. * Manufactured from solid billet aviation aluminum. * Matching Plastic Covers for thermal


TDI-X5 Shown Above	TDI-X5 Shown Above

TDI-X5 Shown Above on MP-5	TDI-X5 Shown Above on MP-5 with Grip

TDI-X5 Shown Above on MP-5 with TDI-FFG2B Folding Grip	TDI-X5 Shown Above on MP-5 with TDI-SVGB

Item Number	Description	Price
TDI-X5	TDI Arms Five Rail Mounting System for MP5	293

TDI-Triple Picatinny Rail System For Front Sight of AR-15/M16
	TPRX15X shown on top and FL-1 shown on bottom TPR15X can be used alone or with the FL-1 (sold separately)
TPRX15L and FL1 shown above on X6X and X6XL

Item Number	Description	Price
TDI-TPR15X	TDI-Triple Picatinny Rail System For Front Sight of AR-15/M16	$60.00
TDI-FL-1	TDI Aluminum Front Rail (rail only)	$30.00

SIDE BY SIDE PICATINNY RAILS ADAPTER
Clamps to front sight and allows mounting of two accessories on the Picatinny rails on the adapter. Allows full use of original open sights

TPR-16	TPR-16 Shown On Gun

TPR-17	TPR-17 Shown On Weapon W/Accessories
Features No gunsmithing requires on TPR-17 Gunsmithing is required on TPR-16 Constructed of billet aviation grade aluminum using CNC machinery

Item Number	Description	Price
TDI-TPR16	TDI Arms Side By Side Picatinny Rail Adapter fits FN P90	$55.00
TDI-TPR17	TDI Arms Side By Side Picatinny Rail Adapter fits Micro Galil	$55.00

Picatinny Rail Laser/Flashlight Mount


BK1 Adapter, Mounts any 3/4 inch accessory to a Picatinny Rail. Laser sold separately	BK2 Adapter, Mounts any one inch accessory to a Picatinny Rail. Light sold separately
May require adapter	May require adapter
Features: * Exceptional design detail. * Choice of 2 sizes for different diameters, ¾” & 1” bore. * Fits all types of Picatinny rails. * Efficient and easy to fit. * Quick release mechanism. Easily mounts and dismounts with only your fingers. * Special angle-lip design for easy flashlight slide in. * Moulded from reinforced plastic composite.

Item Number	Description	Price
TDI-BK1-B	TDI Arms 3/4" Diameter Picatinny Rail Mount, black	29
TDI-BK1-OD	TDI Arms 3/4" Diameter Picatinny Rail Mount, OD Green	34
TDI-BK1-T	TDI Arms 3/4" Diameter Picatinny Rail Mount, Desert Tan	34
TDI-BK2-B	TDI Arms 1" Diameter Picatinny Rail Mount, Black	29
TDI-BK2-OD	TDI Arms 1" Diameter Picatinny Rail Mount, OD Green	34
TDI-BK2-T	TDI Arms 1" Diameter Picatinny Rail Mount, Desert Tan	34

Picatinny Rail mounts for Sig Sauer & FN

Features:

* Maximize pistol versatility for the fitting of light, laser and optical

equipment, bi-pods and any Picatinny rail mounted device.

* Secure fit for accuracy and stability.

* Lightweight.

* Milled by CNC and constructed of anodized aviation aluminum

* Easy to fit. Secured by Allen bolts. No gunsmithing or any

modification to the Firearm is required.

Item Number	Description	Price
TDI-FNA1	TDI Arms Picatinny Rail Mount for FN Handgun, mount only, no light	53	OUT
TDI-SIGA1	TDI Arms Picatinny Rail Mount for Sig Sauer 226/8/9, mount only, no light	68

1911 Pistol Accessories

1911 Pistol accessories including pistol picatinny rail adaptors to mount flashlights and lasers.

Command Arms 1911 Pistol Picatinny Rail Adaptor Maximize pistol versatility for the fitting of light, laser and optical equipment, bipods and any Picatinny rail mounted device Secure fit for accuracy and stability Lightweight Milled by CNC and constructed of anodized aviation aluminum Easy to fit Secured by Allen bolts No gunsmithing or any modification to the Fire arm is required
Item Number	Price
1911A1	$57.00

Command Arms 2.5 Inch Center Picatinny Rail for AR15/M16/M4

Product Description:
Removable 2.5" center rail for AR15/M16/M4. Mounts on upper or lower handguard. Excellent for mounting lasers/flashlights/vertical grips/bipods. Rail can be used by itself or added to TRM2 to create TRM3. Fits both, standard & thickend heat shields.
Made from reinforced polymer.

Item Number	Price
TRM	$10.00

Command Arms Two 45 Degree Picatinny rails for AR15/M16/M4

Product Description:

Two 45 degree Picatinny rails for AR15/M16/M4. Rail mounts on upper or lower handguard and measures 2.5 inches. Excellent for mounting lasers/flashlights. Fits both, standard & thickend heat shields
Made from reinforced polymer.

Picture Coming Son

Item Number	Price
TRM2	$12.00

Command Arms Triple Rail Mount for AR15/M16/M4 Handguard
Product Description:
Two 45 degree Picatinny rails with removable center rail (total of 3 rails) for AR15/M16/M4. Mounts on upper or lower handguard. Excellent for mounting lasers/flashlights/vertical grips/bipods. Fits both, standard & thickened heat shields
Made from reinforced polymer

Item Number	Price
TRM3(TRMTRM2)	$18.00

CA Picatinny Rail Mounted Pouch Quick release mechanism. Suitable for M16/AR15 Magazine. Made of High Tech Composite Polymer. Designed for durability and high performance in tactical use. Fits any Picatinny Rail including Tdi Butt Stock & Belt Clip The Picatinny bailt clip (model RC) not included

MPS Shown With Mag (Mag Not Included)		MPS Shown With Mag (Mag Not Included)

MPS Shown On Picitinny Belt Holder RC-1		MPS Shown With Mag On Gun
Item Number	Description	Price
MPS	CAMA16 M16/AR15 Picatinny Magazine Pouch	$17.00

CA M16 Vertical Magazine Coupler TDI is proud to introduce this innovative M16 / AR15 Tactical Magazine Coupler. This unique item is Israeli Military and Police Standard Issue. Allows easy access to a loaded mag. Features The M16C-V 's upper part snaps into the weapon's magazine holder. A safety catch secures the magazine to the M16C-V . 3 The M16C-V housing protects the magazine base and enables a secure hold and quick release. Additional hole to enable attachment of a securing cord. (Molded from reinforced plastic composite, it is super light and extremely durable)

M16CV		M16CV Shown With mag (mag not included)

M16CV Shown In Gun Holding Mag		M16CV Shown With Mag Loaded
Item Number	Description	Price
M16CV	CA M16 Vertical Magazine Coupler	$17.00

CA AR-15/M16 Horizontal Tactical Magazine Coupler TDI is proud to introduce this innovative M16 Horizontal Tactical Magazine coupler .This unique item is Israeli Military and Police Standard Issue. Allows easy access to a loaded mag. Features The M16C-H's upper part SNAPS into the weapon's magazine holder. A safety catch secures the magazine to the M16C-H. 3 The M16C-H housing protects the magazine base and enables a secure hold and quick release. Additional hole to enable attachment of a securing cord. (Molded from reinforced plastic composite, it is super light and extremely durable)

M16CH Shown In Gun Holding Mag		M16CH Shown With Mag Loaded
Item Number	Description	Price
M16CH	AR-15/M16 Horizontal Tactical Magazine Coupler	$17.00

Rotating Picatinny Rail Belt Clip Keep your hand free by attaching your flashlight mount and light or any small Picatinny Rail Device to this ingenuous device. - 360° rotation. - Ideal for Law Enforcement Officers, Paramedics, Hikers etc... Works great with MA16

RC-1		RC-1

RC-1 Shown With MA16
Item Number	Description	Price
RC-1	Rotating Picatinny Rail Belt Clip (For 2 Inch Belts)	$17.00
RC-2	Rotating Picatinny Rail Belt Clip (For 2.25 Inch Belts	$17.00

M16/AR15 Canvas Magazine Pouch (for use with coupled magazines) The MPC magazine pouch that will hold two thirty round M16/AR15 magazines coupled with our M16MC magazine coupler. Manufactured almost entirely of laminated canvas for extra strength, it is designed for rugged use. The magazine pouch is MOLLE and ALICE compatible utilizing nylon straps and metal snaps. It features a side release buckle for ease of opening even when wearing gloves, as well as a Velcro closure that may be disabled to allow silent withdrawal of magazines. The drain hole in the bottom of the pouch allows moisture, dirt and sand to be removed should they infiltrate the pouch. LIFE TIME WARRANTY

Item Number	Price
MPC	$13.00

Command Arms M16/AR15 HAND GUARD ALUMINUM SET 4 sided Picatinny rail system -Thermal rubber covers enhance operator’s grip and protect rails when not in use -No gunsmithing required -Allows user to customize their gun with equipment for a specific mission -Made of Aluminum
Item Number	Price
M44SM	$120.00

Command Arms Universal Lower Swivel Stud Picatinny Rail Mount

Universal mounting platform accepting Picatinny and Weaver type Bipods, Flashlight & Laser Accessories, Grips and more.
Unique locking mechanism to fit the swivel stud.
Enables continuous zero hold.
Milled of billet aviation grade aluminum using CNC machinery.
Swivel Stud is fitted on the mount.
No gunsmithing is required.
Lifetime Warranty.

Item Number	Price
UPR	$52.00

Command Arms Laser Kit for M16/AR15 Laser Kit consists of: Specially Designed Side-by-Side Picatinny Adaptor for Front Sight - TPR15X Laser Mount for Picatinny Rail - BK1 (Suitable for 3/4" Devices) BeamShot 1000S Laser Sight One 123A Lithium Battery (3V) Bungee Pressure Switch Padded Plastic Box Lifetime Warranty (Except for Laser Sight & Pressure Switch)

Item Number	Price
TGK2	$230.00

Command Arms Flashlight kit for M16/ AR15

Flashlight Kit consists of:

Front Sight Twin Picatinny Rail Adaptor
Flashlight Mount for Picatinny Rail - BK2 (Suitable for 1" devices)
SureFire G2 Nitrolon Flashlight (Black)
Two 123A Lithium Batteries (3V)
Padded Plastic Box
No gunsmithing required (Except for P90)
Lifetime Warranty
(Except for Flashlight)

Item Number	Price
TGK1	$139.00

Command Arms Combatant Vest

Product Description:

Combatant vest designed to carry heavy loads and a hydration system, enabling quick draw. *hydration system not included.

Item Number	Description	Price
TV7711B	Command Arms Combatant Vest Black	$210.00
TV7711T	Command Arms Combatant Vest Tan	$210.00
TV7711ODG	Command Arms Combatant Vest OD Green	$210.00

Command Arms Remington 870 Collapsible Stock • Converts long shotgun into a 6 position collapsible stock with pistol grip &bull Remington adaptor is made from aviation grade aluminum, polymer stock and grip • Transforms horizontal grip to pistol grip • Utilizes an AR15/M16 buffer tube and CBS collapsible stock NOTE: For Remington RS870 12-guage only. LIFE TIME WARRANTY

Item Number	Description	Price
RS870B	Command Arms Remington 870 Collapsible Stock Black	$155.00
RS870T	Command Arms Remington 870 Collapsible Stock Tan	$155.00
RSODG	Command Arms Remington 870 Collapsible Stock ODG	$155.00

Command Arms Quick Detach Combat Vertical Grip

Permits the operator to get "on target" faster and improves muzzle control during rapid fire. Allows the weapon to be held with a natural fighting stance. Fits any Weaver or Picatinny rail. Interior of grip serves as a plugged storage compartment. No tools or gunsmithing required.
LIFE TIME WARRANTY

Item Number	Description	Price
VG1B	Command Arms Quick Detach Combat Vertical Grip Black	$37.00
VG1T	Command Arms Quick Detach Combat Vertical Grip Tan	$37.00
VG1ODG	Command Arms Quick Detach Combat Vertical Grip OD Green	$37.00

Command Arms Shotgun Rail for Ribbed Barrel Allow you to easily attach a picatinny rail to and barrel 12ga shotgun or smaller ribbed barrel. Fits ribbed or vented rifle or shotgun barrel.

Item Number	Price
HGA1	$52.00